WATER JET CUTTING PUMPS
FLEXIBILITY & RELIABILITY
RANGE OF PUMPS
FOR WATER JET CUTTING
With your help,
we will find the ideal model
for your type of use.
We have privileged associations
with the major pump manufacturers.
This symbiosis allows us to offer you
a wide range of pumps.
VERY HIGH PRESSURE
MULTIPLIER TYPE PUMPS
BFT Brand
- Maximum 4 150 bar
- High load rate, reliable, economical
ECOTRON® high pressure pumps are available in power classes ranging from 11 kW to 45 kW. Its operating pressure of 4000 bar offers the right balance between long maintenance intervals and a high cutting speed. The ECOTRON® high pressure pump is our basic model. Its principal feature is flow rates between 1.2 and 4.3 litres per minute and an operating pressure of 4000 bar.
VERY HIGH PRESSURE
MULTIPLIER TYPE PUMPS
KMT brand
- Maximum 4 150 bar
- High charge rate, reliable, economical
High charge rate, reliable, economical
Optimum reliability, but also quick and easy maintenance; these the main characteristics sought after when KMT develops all its high-pressure water jet cutting products. The simple modular design makes it possible to replace each piece of wear individually. That’s why this design principle ensures optimal durability of each component.
ULTRA HIGH PRESSURE
MULTIPLIER TYPE PUMPS
KMT brand
- Maximum 6200 bar
- Projects requiring enhanced productivity and/or extreme materials and thickness.
Compared to conventional 4,100 bar water jet cutting, the maximum pressure range offers the following advantages:
Economy of use and service life is prolonged as a result of the high pressures to which they are exposed. Thus, KMT Water jet’s original PRO series offers optimized high-pressure equipment that meets the most rigorous specifications in terms of reliability, cutting quality and ruggedness in continuous use.
VERY HIGH PRESSURE
MULTIPLIER TYPE PUMPS
BFT Brand
- Unique variation range on the market from 100 bar to 4150 bar
- Brushless motor
- Power Saving
- Ideal for composites
The SERVOTRON® high-pressure pump is available in the 37 kW and 45 kW power classes. Its operating pressure of 4,000 bar is the first choice in professional water jet cutting.
TÜV Austria has confirmed that SERVOTRON® high pressure pumps can offer up to 24% energy savings compared to conventional pumps. They are available with a delivery rate of 3.8 or 4.6 litres per minute.
HIGH PRESSURE
DIRECT ACTION TYPE PUMPS
KMT brand
- Maximum 3 800 bar
- Low load rate
Direct drive technology for High Pressure pumps was developed in the 1990s and is an alternative to hydraulic intensifier pumps for water jet cutting machines. In comparison, direct drive pumps rely on a simple technology that transmits power from the motor to the superstructure via a belt and pulley drive system. Water is pressurised by 3 pistons.
